Leading applicator of specialist coatings for the refurbishment of commercial properties across the UK

At InPost’s busy Lincoln depot on Sadler Road, the operational demands of a high traffic logistics environment had begun to take a visible toll on the building’s external fabric. As a national parcel distribution centre serving a wide regional network, the site experiences constant vehicle movement, exposure to the elements, and daily wear on essential components such as guttering, cladding, loading bay structures and fire escape routes.

InPost required a specialist contractor capable of delivering a full external refurbishment programme that would not only restore the building’s condition but also strengthen long term performance and reduce future maintenance needs. Cladding Coatings were appointed to carry out this work, drawing on extensive experience within the industrial and logistics sector.
The project began with a detailed assessment of the building envelope. Years of exposure had resulted in corrosion across isolated areas of metalwork, deterioration of guttering and downpipes, and visible wear around the HGV loading bay. These issues, while common in older industrial units, can quickly escalate if left untreated, leading to water ingress, structural damage, and operational disruption. Our team developed a comprehensive refurbishment plan that addressed each element systematically, ensuring the depot would be fully protected and visually refreshed.

One of the most critical areas was the guttering and downpipe system. Effective drainage is essential for any industrial building, particularly one with large roof spans and constant vehicle activity. The existing gutters were obstructed with debris and silt, preventing water from flowing freely. Our operatives carefully cleared and rodded through the entire guttering network, ensuring it was left fully free flowing. Any disturbed surfaces were made good as part of the process. Several sections of downpipe were missing, corroded or damaged, so these were replaced with new components to restore full functionality. To provide long term protection, the guttering was repaired, re jointed and re lined using the Giromax Guttercoat system. This created a seamless, durable internal surface designed to withstand ongoing exposure to water and environmental contaminants.


Attention then turned to the metal profile sheeting across the building. Over time, fixings and caps can degrade, leading to movement, leaks and compromised structural integrity. The full elevation was thoroughly cleaned to remove dirt, pollutants and residues that accumulate on industrial cladding. Damaged fixing caps were replaced, and any disturbed surfaces were reinstated to ensure the building envelope remained secure and weather resistant. This preparatory work is essential before any further refurbishment can take place, as it ensures coatings and treatments adhere correctly and deliver their full performance lifespan.

The metal cladding surrounding the HGV loading bay required more intensive treatment. This area experiences constant vehicle movement, vibration and exposure to exhaust fumes, all of which accelerate corrosion. Our team treated all affected areas, removing corrosion and preparing the surfaces to a professional standard. Once prepared, the cladding was redecorated using a three coat system of trade quality, purpose formulated paint applied via professional spray equipment. This method ensures an even, consistent finish and provides a robust protective barrier against future wear. The refreshed loading bay area not only improved the depot’s appearance but also strengthened the metalwork against ongoing operational demands.
During the refurbishment, it became clear that the extract fan grill cover had sustained damage. As part of our commitment to delivering a complete solution, we replaced the damaged grill cover with a new unit matched to the existing specification. This ensured continuity in appearance and performance while maintaining essential ventilation functions.
Perimeter fire escape doors also showed isolated corrosion. As these doors are critical safety assets, they must remain in excellent condition. We removed all corrosion, prepared the surfaces thoroughly and redecorated them using the same three coat spray applied system used elsewhere on the project. This restored the doors to a safe, compliant and visually consistent standard.

Safe access to the roof was required to complete the works. Cladding Coatings installed a secure access tower and a new mansafe system, ensuring all operatives could work safely at height and that the building now benefits from compliant fall protection equipment for future maintenance.
The completed refurbishment at InPost Lincoln delivered a fully revitalised building envelope, improved drainage performance, strengthened metalwork, and enhanced safety features.
By addressing each issue with precision and industry leading materials, Cladding Coatings ensured the depot is now better protected against weathering, corrosion and operational wear. The project demonstrates our commitment to delivering high quality, long lasting solutions for industrial and logistics clients across the UK, supporting both the functionality and appearance of their essential facilities.






















